There are many different types of window tint on the market made of different materials and serves a variety of roles.
All films begin with tinted windows. In many cases two or more layers of film tied together in a multi-layer barrier against everything from scratching to UV exposure.
Manufacturers of solar tinted film may also contain use chemical UV blockers (eg, cyclic imino ester), and if the film is to serve only this purpose there is no additional materials for use in the film.
Below is a list of the different types of window tint we can supply.
The material sandwiched between the adhesive and the hard coating is scratch resistant for most types of films stand out. The most important of color film contains only one layer of color film, which serves both absorb heat and reduce visibility viewer. Usually there is some impact on visibility from the cab of the vehicle, but will be less. Due to the application of color film on the inside of car windows, the heat rejected by the film is partly stored in the glass itself, and the movement of outside air is used to attract more than the heat built during normal driving. Tinted film should never be used inside the glass temperature as it will catch a lot of heat between the panes when there is no air movement.
Deposition techniques are more complex processes, where the movie sucked the tank containing certain types of ingots of metal, usually a nickel-chromium or aluminum. The pressure tank is then reduced to create an artificial vacuum, which is flooded with argon gas and ingots are heated to cause the metal to leave the particles are transported to the surface film. Density of deposited metal is controlled by the speed with which the film passes through the chamber. Deposition technique is relatively inexpensive and is commonly used, but limit the types of metals that can be used in the production process, in which case a fairly limited product offering few alternatives.
Sprayed (Metallic) Film
This process is a bit ‘more complicated the deposited films. As deposited films, sputtering is a vacuum, but resistance metallization is realized at the atomic scale. With electromagnetic fields, argon gas (or other inert gas) is directed towards the metal. This process results in small groups of molecules to separate from the metal, and even the deposit on the film. Watch the deposited films have been used in a very limited number of metals due to the nature of this process, sputtering can be done for more than 20 types of metal, which makes the process much more complex and lead to a coating much lighter and thin. These metallized films are slightly more expensive to produce than dyed films, as this class until the top of the price range of color film.
Hybrid films the best of both worlds of film types mentioned above, using a colored film layer and a reflective metal layer for best results. By combining the reflective properties of metals with absorption features tinted film, less of each material is required, usually resulting in a slightly lighter tone to the exhaust heat from one or more types of films mentioned above on their own, with low reflectivity. This film breaks the misconception that requires the rejection of the worst films to provide heat. In most cases, the films chosen for dark colors are little more than the aesthetic value and greater privacy for a lower price.
Movie tone ceramic is a relatively new phenomenon in the industry and are absolutely top level. Using either dyes or metals found in other films, ceramic color film designed with nanotechnology, and also exceeds the capacity of heat rejection, even for the best metal film has none of the interference signal normally associated. In addition, this film is very durable in order to strengthen the glass as it is used, almost eliminating the possibility of glass is crushed in a collision or other accident. Ceramic Films are also highly resistant to fading, cracking, discoloration, bubbling, and many other disadvantages associated with other types of films. However, it has one drawback – price. Often it is much more expensive than other programs, but if you are looking for absolute best solution dyed available, the ceramic film is certainly the highest quality movies on the market.
Our window tinting services
If you live in Central Coast or surrounding areas or have a business located in the local Central Coast region in NSW Australia then Neil can help with flat glass window tinting installation.
Neil provides a free personal measure and quote and will consult with you and provide expert advice right the way through too the completion of your window tinting.
You can be certain of a professional tinting installation job.
All window tinting comes with a long manufacturers tint film warranty.
Window Tinting Wyong Central Coast are be able to assist you with your home window tinting requirements. Call today for a quote 0488 253 041.